Lockout Tagout
Before working on this machine, perform lockout-tagout procedures per the rules of your plant. Determine the sources of energy on this machine – mechanical, electrical, pneumatic and hydraulic – and release or vent sources of stored energy – electrical capacitors, air receivers, and hydraulic accumulators. Shut off sources of power – electrical, pneumatic and hydraulic. Safely block mechanical sources of energy such as loaded springs and loaded machine members, or safely position the machine members so they are unloaded and springs are not under tension. Beware of hot surfaces which can cause burns.
Component:
155.01
Description:
Rectifier Plate
Manufacturer:
Rexroth
Part Number:
Z4510-2X/
Stock Code:
Not Provided
Electrical Address:
Not Provided
Component Application:
This rectifier plate consists of four check valves which direct the flow of hydraulic fluid through Pressure Compensated Flow Control Valve 188.01 from the inlet port of the flow control valve to the outlet port (regulated flow port) of the flow control valve regardless of whether the fluid is coming from the directional control valve or from the cylinders.
